|
CommFront offers
a range of high-quality, industrial-grade, port or
external-powered RS232 RS485 RS422 TTL converter products.
These plug-and-play products operate within a
wide temperature range (-40ºF
to 185ºF / -40ºC to 85ºC),
feature 600W surge protection and 15kV static protection, and come with
built-in 120 Ohm terminators for easy installation. Whether your environment is commercial or
industrial, "clean" or "noisy"*, our converter products
provide safe, easy, and cost-effective solutions for your
data-conversion applications.
* A "noisy" environment
is an area
surrounded by ground loops, transient surges
and spikes, which could potentially harm your expensive
equipment such as computers and data communication
devices.
The CommFront opto-isolated converters and isolators provide
simple and effective ways to protect your devices from such
potential harms. |
|
|
RS232 RS485 RS422 TTL
CONVERTER / ISOLATOR / REPEATER SELECTION TABLE
|
|
Part
Number |
Description |
Price |
|
CVT-485-1 |
RS232 <=> 2-wire RS485
Converter
(Industrial/Port-powered/300 to 115.2K Baud) |
$47.95
Order |
|
CVT-422-1 |
RS232 <=> 4-wire
RS422 Converter
(Industrial/Port-powered/300 to 115.2K Baud) |
$47.95
Order |
|
CVT-485_422-1 |
RS232 <=> 2-wire RS485 or
4-wire RS422 Converter
(Industrial/Port-powered/300 to 115.2K Baud) |
$54.95
Order |
|
CVT-485-3 |
Opto-Isolated RS232 <=>
2-wire RS485 Converter
(Opto-Isolated/Industrial/Port-powered/300 to 57.6K Baud) |
$74.95
Order |
|
CVT-422-3 |
Opto-Isolated RS232 <=>
4-wire RS422 Converter
(Opto-Isolated/Industrial/Port-powered/300 to 57.6K Baud) |
$74.95
Order |
|
CVT-485_422-3 |
Opto-Isolated RS232 <=>
2-wire RS485 or 4-wire RS422 Converter
(Opto-Isolated/Industrial/Port-powered/300 to 57.6K Baud) |
$79.95
Order |
|
CVT-232A-3 |
RS232 Isolator (TX, RX,
GND)
(3-Wire/Opto-Isolated/Industrial/Port-powered/300 to
38.4K Baud) |
$49.95
Order |
|
CVT-232B-3 |
RS232 Isolator (TX, RX,
DTR, DSR, RTS, CTS, GND)
(7-Wire/Opto-Isolated/Industrial/Port-powered/300 to
19.2K Baud) |
$59.95
Order |
|
RPT-232-3 |
Opto-Isolated RS232
Repeater (TX, RX, GND)
(3-Wire/Opto-Isolated/Industrial/Port-powered/300 to
28.8K Baud) |
$34.95
Order |
|
RPT-485_422-2 |
2-wire RS485 <=> 4-wire
RS422 Converter
RS485 Repeater / RS422 Repeater
(Industrial/External-5VDC-powered/300 to 115.2K Baud) |
$69.95
Order |
|
TTL-232-1 |
RS232 <=> TTL 5V Converter
(Industrial/Port-powered/300 to 115.2K Baud) |
$39.95
Order |
|
TTL33-232-1 |
RS232 <=> TTL 3.3V
Converter
(Industrial/Port-powered/300 to 115.2K Baud) |
$39.95
Order |
|
TTL-485-2 |
TTL 5V <=> 2-wire RS485
Converter
(Industrial/External-5VDC-powered/300 to 115.2K Baud) |
$49.95
Order |
|
TTL-485_422-2 |
TTL 5V <=> 2-wire RS485 or
4-wire RS422 Converter
(Industrial/External-5VDC-powered/300 to 115.2K Baud) |
$59.95
Order |
|
|
|
|
RS232 TO RS485
CONVERTER (PORT-POWERED)
|
|
|
$54.95
Order Here |
|
The CVT-485-1 is
an industrial grade (wide temperature range
with surge & static protection) port-powered bi-directional
RS232 to RS485
converter, which can be used to convert any standard RS-232C
port into a 2-wire half-duplex RS-485 port and vice versa.
The unit is powered from the RS232
data line, it also supports data direction auto-turnaround,
therefore, no external power or flow control is required.
more info |
data sheet |
FAQs |
|
|
|
|
|
|
|
RS232 TO RS422
CONVERTER (PORT-POWERED)
|
|
|
|
$59.95
Order Here
|
|
The CVT-422-1 is
an industrial grade (wide temperature range with
surge & static protection) port-powered bi-directional
RS232 to RS422 converter,
which can be used to convert any standard RS-232C port into a 4-wire
full-duplex RS-485 or RS-422 port and vice versa.
The unit is powered from the RS232 data line, it also supports
data direction auto-turnaround, therefore, no external power or flow
control is required.
more info |
data sheet |
FAQs
|
| |
|
|
RS232 TO RS422 /
RS232 TO RS485 CONVERTER (PORT-POWERED)
|
|
| |
$64.95
Order Here |
|
The CVT-485_422-1 is
an industrial grade (wide temperature range with
surge & static protection) port-powered bi-directional
RS232 to RS485 / RS232 to RS422
converter,
which can be used to convert any standard RS-232C port into a 2-wire
RS-485 port, or a 4-wire full-duplex RS-485 or RS-422 port and vice
versa.
The unit is powered from the RS232 data line, it also supports
data direction auto-turnaround, therefore, no external power or flow
control is required.
more info |
data sheet |
FAQs |
|
|
| |
|
|
OPTO-ISOLATED
RS232 TO RS485 CONVERTER (PORT-POWERED) |
|
|
|
$84.95
Order Here |
|
The CVT-485-3 is
an
industrial grade (wide temperature range with surge & static
protection) optically isolated bi-directional
RS232 to RS485 converter, which can be used to convert any
standard RS-232C port into a 2-wire half-duplex RS-485 port
and vice versa.
This product features
opto-isolation circuitry, which effectively protect your
RS-232 devices from
ground
loops, transient surges and spikes.
The unit is powered from the
RS-232 data line; it also supports data direction
auto-turnaround. Therefore, no external power or flow
control is required.
more info |
data sheet |
FAQs |
| |
|
|
OPTO-ISOLATED
RS232 TO RS422 CONVERTER (PORT-POWERED) |
|
|
|
|
|
$84.95
Order Here |
|
The CVT-422-3 is
an
industrial grade (wide temperature range with surge & static
protection) optically isolated bi-directional
RS232 to RS422 converter, which can be used to convert any
standard RS-232C port into a 4-wire full-duplex RS-485 or
RS-422 port and vice versa.
This product features
opto-isolation circuitry, which effectively protect your
RS-232 devices from
ground
loops, transient surges and spikes.
The unit is powered from the
RS-232 data line; it also supports data direction
auto-turnaround. Therefore, no external power or flow
control is required.
more info |
data sheet |
FAQs |
| |
|
|
|
|
OPTO-ISOLATED
RS232 TO RS485 RS422 CONVERTER (PORT-POWERED) |
|
|
|
|
|
$89.95
Order Here |
|
The CVT-485_422-3 is
an
industrial grade (wide temperature range with surge & static
protection) optically isolated bi-directional
RS-232 to RS-485 / RS-232 to RS-422 converter, which can be
used to convert any standard RS-232C port into a 2-wire
half-duplex RS485 port or a 4-wire full-duplex RS-485 or
RS-422 port and vice versa.
This product features
opto-isolation circuitry, which effectively protect your
RS-232 devices from
ground
loops, transient surges and spikes.
The unit is powered from the
RS-232 data line; it also supports data direction
auto-turnaround. Therefore, no external power or flow
control is required.
more info |
data sheet |
FAQs |
|
|
|
|
| |
RS232 ISOLATOR
(3-WIRE / PORT-POWERED) |
| |
|
|
|
| |
$64.95
Order Here |
|
The CVT-232A-3 is
an industrial grade (wide temperature range with surge &
static protection) port-powered RS-232 isolator. The unit
optically
isolates three (3) RS-232 lines (TX, RX and GND), which
effectively protects your RS-232 devices from
ground
loops, transient surges and spikes.
Optical isolation also
eliminates ground loop and noise problems.
The unit is powered from the
RS-232 data line (self-powered), and therefore, no external
power or RTS, DTR is required.
more info |
data sheet |
FAQs |
| |
|
|
| |
|
| |
RS232 ISOLATOR
(7-WIRE / PORT-POWERED) |
| |
|
| |
$74.95
Order Here |
|
The CVT-232B-3 is
an industrial grade (wide temperature range with surge &
static protection) port-powered RS-232 isolator. The unit
optically
isolates seven (7) RS-232 lines (TX,
RX, RTS, CTS, DTR, DSR and GND),
which effectively protects your RS-232 devices from
ground
loops, transient surges and spikes.
Optical isolation also
eliminates ground loop and noise problems.
The unit is powered from the RS-232 data line
(self-powered), and therefore, no external power or RTS, DTR
is required.
more info |
data sheet |
FAQs |
| |
|
|
|
| |
OPTO-ISOLATED
RS232 REPEATER (3-WIRE / PORT-POWERED) |
|
|
|
$54.95
$34.95
Order Here
|
|
The RPT-232-3 is
an
industrial
grade (wide temperature range with surge & static
protection)
optically isolated RS-232 data repeater (extender) (TX, RX,
and GND), which works in pairs to extend the full-duplex
RS-232 distance up to 1.8 miles (3 km). This product
features opto-isolation circuitry, which effectively protect
your RS-232 devices from
ground
loops, transient surges and spikes.
The unit is powered from the
RS-232 data line, and therefore, no external power or RTS,
DTR is required.
more info |
data sheet |
FAQs |
| |
|
|
RS485 TO RS422
CONVERTER / REPEATER (EXTERNAL-POWERED) |
|
|
$79.95
Order Here |
|
The RPT-485_422-2 is
an industrial grade (wide temperature range
with surge & static protection) bi-directional
RS485/RS422
repeater/converter, which can be used to extend the RS-485
or RS-422 distance to up to 4000 ft (1.2km). It can also be
used to convert a two-wire RS-485 signal into a four-wire
RS-422 signal, and vice versa.
The unit
is powered from an external 5VDC power supply. It features
data direction auto-turnaround, and therefore, no flow
control is required.
more info |
data sheet |
FAQs |
|
|
|
|
|
|
|
|
|
|
|
RS232 TO
TTL/CMOS 5V CONVERTER (PORT-POWERED)
|
|
|
$49.95
Order Here |
|
The TTL-232-1 is
an industrial grade (wide temperature range
with surge & static protection) port-powered bi-directional
RS232 to TTL/CMOS 5V
converter, which can be used to convert any standard RS-232C
port into a 5VDC TTL/CMOS compatible level and vice versa.
The unit is powered from the RS-232
data line, and therefore, no external power or RTS, DTR is
required.
more info |
data sheet |
FAQs |
|
|
|
|
RS232 TO
TTL/CMOS 3.3V CONVERTER (PORT-POWERED) |
|
|
|
|
$49.95
Order Here
|
|
The TTL33-232-1 is
an industrial grade (wide temperature range
with surge & static protection) port-powered bi-directional
RS232 to 3.3VDC
TTL/CMOS converter, which can be used to convert any
standard RS-232C port into a 3.3VDC TTL/CMOS compatible
level and vice versa.
The unit is powered from the
RS-232 data line, and therefore, no external power or RTS,
DTR is required.
more info |
data sheet |
FAQs |
|
|
|
|
RS485 TO TTL 5V
CONVERTER (EXTERNAL-POWERED)
|
|
|
|
|
|
$54.95
Order Here
|
|
The TTL-485-2 is
an industrial grade (wide temperature range
with surge & static protection) bi-directional
RS485 to TTL/CMOS 5V
converter, which can be used to convert RS-485 to 5VDC
TTL-compatible levels and vice versa.
The unit is powered from an external
5VDC power supply. It supports data direction
auto-turnaround, and therefore, no flow control is required.
more info |
data sheet |
FAQs
|
|
|
|
|
|
RS485/RS422 TO
TTL 5V CONVERTER (EXTERNAL-POWERED) |
|
|
|
$64.95
Order Here
|
|
The TTL-485_422-2 is
an industrial grade (wide temperature range
with surge & static protection) bi-directional
RS422/RS485 to TTL/CMOS 5V
converter, which can be used to convert RS485 to 5VDC
TTL-compatible levels and vice versa. It is also ideal for
extending the full-duplex TTL distance.
The unit is powered from an external
5VDC power supply. It supports data direction
auto-turnaround, and therefore, no flow control is required.
more info |
data sheet |
FAQs |
|
|
|
|
|
